Wirelles Remote Control 16 Channel New New
Dengan 3 Model settingan
6-way wireless smart receiver controller, 16 relay outputs switch signal and with a work light, the device can be controlled to achieve the motor forward and reverse; or switch on and off as well as a variety of special conversion control program requirements. Mainly used in electric doors, windows, lifting equipment, gateways, lifts, industrial control and security industry and so on.
The wireless receiver controller, a high-security, large memory capacity, stable performance, low power consumption of the features, and easy to use, without using the traditional jumper or DIP switch coding, just the remote control radio signals emitted let the reception controller receives and stores, supporting the use can be realized. If a good learning remote control is lost during use, simply receiving information stored in the controller cleared the lost remote control will not be able to receive the remote controller, the desire to regain the right to use must be made by the owner again relearn once before use.
First, work
DC-15 / 16L five operating modes: self-locking signal, the interlock signal, a signal of non-lock, self-locking and non-locking signal coexist
1, the signal from the lock - Press the remote control key learning 1
2, the signal of non-lock - 2 keys on the remote control to learn
3, the signal interlock - Press the remote control key learning 3
4, the signal from 1 to 8 self-locking and non-locking 9 to 16 coexisting - Press the remote control key learning 4
5, the first signal path self-locking and non-locking 2 to 16 coexisting - Press the remote control key learning 5
Second, the output mode
1, the signal from the lock: Press No. 1 key learning remote control
Press No. 1 key on the remote control, and the key corresponding to the relay 1 energises holding, press No. 1 key, relay 1 off; press the remote control key 2, 2 merged holding the key corresponding to the relay, then 2 key, 2 relay off; 3 to 16 key do the same work cycle.
2, the signal of non-lock: Press the 2 key learning remote control
Press and hold the No. 1 key on the remote control, and the No. 1 key corresponding to the relay, let go after the relay off, press the 2 key, and the No. 2 key corresponding relay, let go off; 3 to 16 key do the same work cycle.
3, the signal interlock: Press the remote control key learning 3
Press No. 1 key on the remote control, the corresponding relay and hold the No.1, No.2 key press, relay 1 opens and button 2 and hold the corresponding relay; 3 to 16 key do the same work cycle.
4, the signal from 1 to 8 self-locking and non-locking 9 to 16 exist: the remote control key learning 4
Remote control corresponding to 15 relays, in which 1 to 8 for the self-locking function, 9 to 16 non-lock function.
5, the first signal path self-locking and non-locking 2 to 16 co-exist: the remote control key learning 5
Remote control corresponding relays 16, wherein the first path is self-locking function, from 2 to 16 non-lock function.
Note: If you want to learn a good receiver is changed to another function, please re-code the receiver after learning clear code.
study method:
1. Press the button lights after learning to let go of the receiver into the learning state; according to the function they need to press on the remote control to select a key study, the receiver receives the signal lamp flashes once said that success in learning .
Removal method:
Press learning key on the receiver around about eight seconds until the indicator light is off, has been successfully cleared. The receiver can store about 30 different coded remote control.
Fourth, the major technical indicators
1, the working voltage: 12VDC, 24VDC optional
2, the quiescent current: ≤7mA
3, Working temperature: -20 ℃ - + 70 ℃
4, receiving sensitivity: ≥-105dBm
5, the operating frequency: 315MHz to 433MHz
6, the control voltage: AC and DC optional
7, the output current: ≤5A